Bilge & Bilge Pump Cleaner

KTS - Oil Smasher® Marine Bilge Degrader/Disposal

Our Environmentally Safe Products And Solutions Enable Environmentally
Proactive Boaters To Comply With The Clean Marina Regulations.

 

 

FEATURES:
 
  1 Add to oily bilge to reduce or eliminate contamination.
     
  2 Emulsifies, disperses and neutralizes bilge waste prior to discharge.
     
  3 Effectively degrades oily waters containing, oil, diesel or gasoline, helping to prevent water contamination.
     
  4 Ideal for engine repair/service marine shop maintenance.
 
BENEFITS:
  • Readily Biodegradable
  • Non Toxic
  • Non-Butyl
  • No Noxious Odors
  • Water-Based
  • No Phosphates
  • No Flash Point
  • Leaves No Residue
  • No Chlorinated Solvents
  • No Volatile Vapors
  • Non-Petroleum
  • No Halogens

 

CLEANING BILGE SPACES AND PUMPING BAYS AT SEA:

With the concentration of KTS Bilge® adjusted according to the type of soil in the area, follow the following steps:
(CAUTION: DO NOT APPLY DIRECTLY ON GLASS OR FIRBERCLASS)

  1. Calculate the volume of water required to fill the bilge to a depth, which will cover all of the sludge areas to be cleaned.
  2. Determine the quantity of KTS Bilge® product needed to yield the desired solutions strength.
  3. Apply KTS Bilge® to the area to be covered, fill with water to the required depth.
  4. The vessel’s motion will mix the solution and provide the agitation required for cleaning. Allow 24 hours or more agitation time.
  5. Pump the bilge dry, flush down and repeat if necessary.

 

PRODUCT ID (USA/Mexico):
PACK SIZE:
KTS152
(900ml-BilgeAndBilgePumpCleaner-ES)
900ml x 12 bottles/Case
KTS153
(4L-BilgeAndBilgePumpCleaner-ES)
4L x 4 jugs/Case
KTS154
(205L-BilgeAndBilgePumpCleaner-ES)
1 drum (205L)

 

PRODUCT ID (Canada):
PACK SIZE:
KTS144
(900ml-BilgeAndBilgePumpCleaner-EF)
900ml x 12 bottles/Case
KTS145
(4L-BilgeAndBilgePumpCleaner-EF)
4L x 4 jugs/Case
KTS146
(205L-BilgeAndBilgePumpCleaner-EF)
1 drum (205L)